Outdoor Cooking

guides

How to Smoke Pastrami at Home

Smoke pastrami from scratch: brine a brisket flat, apply coriander-pepper rub, smoke at 225°F, then steam for authentic deli results.

Cole Whitaker Cole Whitaker

To smoke pastrami at home, brine a brisket flat for 5 to 7 days in a pink curing salt solution, coat with a coarse coriander and black pepper rub, then smoke at 225°F over oak or cherry wood to an internal temperature of 155–160°F. Wrap in foil, continue to 165°F, then steam to 200°F for 60 to 90 minutes. That final steam is what produces the moist, pliable texture that separates great homemade pastrami from smoked brisket.

What is pastrami and why smoke it yourself?

Pastrami is cured and smoked beef, traditionally made from the navel cut — a heavily marbled section of the beef belly. Most home cooks use brisket flat because the navel cut is difficult to source at retail, and a well-chosen brisket flat produces excellent results. The cure uses sodium nitrite, sold as Prague Powder No. 1 or pink curing salt, to prevent bacterial growth during the long brine, develop the deep pink interior color, and create the cured flavor that defines authentic pastrami.

The case for making pastrami at home is straightforward. Even quality deli pastrami is expensive per pound, and most of what you pay for is labor and overhead — not the beef itself. A home-smoked pastrami from a Choice-grade brisket flat costs a fraction as much per serving and delivers better smoke penetration, a thicker bark, and the satisfaction of a serious project cook. The brine takes 5 to 7 days in the refrigerator with zero active work, and the smoke itself runs 5 to 7 hours at a steady temperature — no more demanding than smoking a chuck roast.

The three-stage process — brine, smoke, steam — is the structure that makes pastrami what it is. Skipping the brine produces spiced smoked beef, not pastrami. Skipping the steam produces a drier, tighter texture that misses the characteristic yielding quality of a deli slice.

How to choose the right cut

A brisket flat weighing 4 to 5 pounds is the standard pastrami cut for home cooks. The flat has a consistent thickness of 1.5 to 2.5 inches across most of its length, which means the brine penetrates uniformly and the finished pastrami slices cleanly without the irregular fat deposits of the point. A 4-pound flat produces roughly 2.5 to 3 pounds of finished pastrami after brining, smoking, and steaming — enough for a dozen generous sandwiches.

Look for a flat with a thin, even fat cap no more than a quarter inch thick. A thick fat cap prevents the brine from penetrating the meat surface evenly and produces more waste on the cutting board. USDA Choice or Prime brisket flat has enough intramuscular fat to stay moist through the long smoke without requiring a heavy fat cap as protection.

For a more traditional result, ask a butcher for beef navel or beef plate. The navel has more fat and a richer flavor profile closer to what New York delis traditionally use, and the higher fat content makes it more forgiving during the smoke phase. However, brisket flat is available at any grocery store and is the right call for most home cooks.

The pastrami brine

The brine cures the meat with sodium nitrite — essential for both food safety and flavor — and seasons the flat throughout, not just at the surface.

Basic pastrami brine for a 4–5 pound brisket flat:

  • 1 gallon cold water
  • 1/3 cup kosher salt
  • 1/4 cup brown sugar
  • 1 tablespoon Prague Powder No. 1 (pink curing salt)
  • 1 tablespoon black peppercorns
  • 1 tablespoon coriander seeds
  • 1 teaspoon garlic powder
  • 1 teaspoon onion powder
  • 2 bay leaves
  • 1/4 teaspoon red pepper flakes (optional)

Combine all brine ingredients in a large pot and heat over medium heat, stirring until the salt and sugar dissolve completely. Remove from heat and cool to room temperature, then refrigerate until cold before adding the meat. A warm brine poured directly over raw beef is a food safety risk and slows the cure.

Submerge the brisket flat fully in the cold brine in a non-reactive container — a 2-gallon zip-lock bag works well for smaller flats. Refrigerate for 5 to 7 days, flipping once daily to ensure even cure distribution. The flat is ready when it is uniformly pink throughout, with no gray patches visible when you cut into the thickest part.

After brining, rinse the flat under cold running water for 15 minutes to remove surface salt, then soak in a container of cold water for two hours to reduce the salinity to a palatable level. Skip the soak and the finished pastrami will be aggressively salty.

Pat the rinsed flat dry and refrigerate uncovered on a wire rack for at least 12 hours before applying the rub. The dry, tacky surface absorbs the rub more evenly and forms a better bark during the smoke.

The pastrami rub

The traditional deli rub is intentionally simple: coriander and black pepper. That simplicity is the point — the rub is a textural coating, not a complex spice profile, and the coriander and pepper together create the cracked, seedy bark that visually identifies pastrami as distinct from other smoked meats.

Classic pastrami rub for a 4–5 pound flat:

  • 3 tablespoons whole coriander seeds
  • 1.5 tablespoons black peppercorns
  • 1 teaspoon garlic powder
  • 1 teaspoon brown sugar (optional — helps bark development)

Toast the coriander and peppercorns in a dry skillet over medium heat for two to three minutes until fragrant. Transfer to a spice grinder or mortar and pestle and crack coarsely — the goal is broken pieces, not a fine powder. Large visible chunks of coriander and pepper create the visual texture of authentic deli pastrami and produce a crust with real bite rather than a uniform coating.

Coat all surfaces of the dried brisket flat evenly with the rub, pressing firmly so the cracked spices adhere. Apply generously — the rub should cover the surface visibly with no bare patches showing.

How to set up your smoker for pastrami

Target 225°F for the smoke. This temperature (25°F below the standard 250°F used for chuck roast) gives the cured surface more time to build bark before the interior climbs to the wrapping point, which produces a thicker, more deeply flavored crust.

Wood selection: Oak is the standard choice for beef pastrami — clean and balanced without the sweetness that cherry adds. Cherry works well if you want a deeper bark color and a slightly sweeter smoke profile that complements the coriander-pepper rub. Hickory produces a more aggressive smoke flavor that can overpower the spice bark on a long cook. Avoid light fruity woods like apple, which produce too mild a smoke for a heavily spiced pastrami.

Temperature monitoring: Use a dual-probe thermometer with one probe at grate level and one inserted into the thickest part of the flat. The grate probe matters because dome gauges typically read 15 to 30°F higher than actual cooking temperature, particularly on offset smokers and older kettles.

Smoke output: Consistent smoke during the first three hours is critical. The coriander-pepper bark develops most aggressively in this window, and the smoke ring forms fastest when the cool, cure-moistened meat surface is first exposed to smoke. On a pellet grill, a loaded smoke tube lit before the cook supplements auger smoke during the low-temperature phase.

How to smoke pastrami: step-by-step

Step 1: Complete the brine (days 1–7). Follow the brine recipe above, keeping the brisket fully submerged and refrigerated for 5 to 7 days. Flip once daily for even cure distribution.

Step 2: Rinse, soak, and dry (day 7). Rinse under cold running water for 15 minutes, soak in cold water for two hours, pat dry, and refrigerate uncovered on a wire rack for 12 to 24 hours until the surface is dry and slightly tacky.

Step 3: Apply the rub. Coat all surfaces with the cracked coriander-pepper rub, pressing firmly. The rub should be thick and visible on every side.

Step 4: Preheat the smoker to 225°F. Stabilize temperature completely before adding the meat. On a charcoal or offset smoker, add three to four fist-sized wood chunks to the fire. On a pellet grill, load and light a smoke tube.

Step 5: Place the flat fat-side up and close the lid. Do not open the smoker for the first two hours. The bark and smoke ring both develop fastest when the cool, porous surface is continuously exposed to smoke from the start.

Step 6: Maintain 225°F and add wood as needed. On a charcoal or offset smoker, add one wood chunk every 60 to 90 minutes for the first four hours. Monitor the grate temperature probe and adjust airflow to hold 225°F steadily throughout.

Step 7: Wrap at 155–160°F. When the internal temperature reaches 155–160°F, the pastrami enters the stall — evaporative cooling from the rub surface holds the temperature in place. Remove from the smoker and wrap tightly in two layers of heavy-duty aluminum foil. No added liquid is needed; the cured flat retains moisture well inside the wrap.

Step 8: Return to the smoker and continue to 165°F. The stall breaks quickly after wrapping and the temperature climbs steadily toward the pull point. Pull the wrapped flat at 165°F — it is safe to eat at this temperature, and the smoke phase is complete.

Step 9: Steam to 200°F. Transfer the wrapped flat to a steaming rack over a pot of simmering water. Steam for 60 to 90 minutes until the internal temperature reaches 200°F and a thin skewer inserts through the foil and flat with zero resistance. Alternatively, place the wrapped flat on a rack in a roasting pan with one cup of water in the bottom, cover tightly with foil, and bake at 275°F for 60 to 90 minutes for the same result.

Step 10: Rest and slice. Rest wrapped for at least 30 minutes before opening the foil. Then slice thin against the grain — pastrami sliced with the grain is tough regardless of how well the rest of the cook went. A mandoline slicer produces uniform deli-thin cuts; a sharp carving knife produces thicker slices that showcase the bark.

Steaming pastrami after smoking

The steaming step is what most backyard cooks skip, and it is why their pastrami does not taste like a deli. Smoking alone brings the brisket flat to a safe internal temperature, but the connective tissue — already softened by the smoke — is not yet fully converted to gelatin. Steaming finishes that conversion and forces moisture into the muscle fibers from the outside, producing the wet, yielding texture of a freshly sliced deli pastrami.

Do not skip the steam to save time. A pastrami pulled directly from the smoker at 165°F and sliced has a drier, tighter texture than it should — closer to smoked brisket than pastrami. The 60 to 90 minutes of steam after the smoke phase is the step that closes the gap between a good cook and a great one.

Serve immediately after resting for the best texture. Pastrami reheated the next day is still excellent — a brief steam or a few minutes in a covered pan over low heat with a splash of water recovers most of the original moisture.

Best for Curing a brisket flat for authentic pastrami flavor and color

Prague Powder No. 1 Pink Curing Salt

Prague Powder No. 1 contains 6.25% sodium nitrite, the exact concentration used in standard pastrami brines. The deep pink color and cured flavor that define real pastrami are impossible without it. One pound cures dozens of pastrami batches.

★★★★★ 4.8 · 6,200 reviews

Check current price on Amazon→

Best for Monitoring pastrami temperature throughout the 5-7 hour smoke

Wireless Dual-Probe Meat Thermometer

Two probes track grate temperature and meat temperature simultaneously and send alerts when the flat hits the 155–160°F wrap point and the 165°F pull temperature. No lifting the lid, no guessing on timing.

★★★★★ 4.8 · 3,420 reviews

Check current price on Amazon→

Best for Cracking coriander seeds and peppercorns coarsely for the pastrami bark

Electric Spice Grinder for Pastrami Rub

A small electric grinder cracks coriander and peppercorns to the right chunky consistency in seconds. A mortar and pestle works but takes considerably more effort for the same result. Keep the pieces large — visible chunks are the hallmark of authentic pastrami bark.

★★★★★ 4.6 · 9,800 reviews

Check current price on Amazon→

FAQ

Frequently asked questions

How long does it take to smoke pastrami at home?
The active smoke takes 5 to 7 hours at 225°F for a 4–5 pound brisket flat, followed by 60 to 90 minutes of steaming. Total project time from start to table is 6 to 9 days, with most of that time spent passively in the brine refrigerator. The hands-on work is under two hours total.
Do I need pink curing salt to make pastrami?
Yes, Prague Powder No. 1 is required for authentic pastrami. It provides the sodium nitrite that creates the characteristic pink color, the cured flavor, and food safety during the long brine period. Pastrami made without it is essentially spiced smoked brisket — still delicious, but a different product with a shorter shelf life.
Can I smoke pastrami on a pellet grill?
Yes. Set the pellet grill to 225°F and add a fully loaded smoke tube before the cook starts. The smoke tube runs three to four hours and supplements auger smoke during the low-temperature phase when pellet grills produce less visible smoke. The rest of the process is identical to an offset or charcoal smoker.
Why do I need to steam pastrami after smoking?
Steaming finishes the collagen conversion that smoking begins. The steam forces moisture into the muscle fibers and renders the remaining connective tissue, producing the moist, pliable texture that defines great deli pastrami. Pastrami that skips the steam step is drier and tighter, closer in texture to smoked brisket.
What wood is best for smoking pastrami?
Oak is the standard choice — clean smoke that complements the coriander-pepper rub without competing with it. Cherry adds color depth and slight sweetness that pairs well with the spice coating. Avoid apple or other light fruity woods, which produce too mild a smoke for a heavy pastrami bark.
How do I slice pastrami?
Slice against the grain, thin — deli pastrami is typically sliced 1/8 to 1/4 inch thick. A mandoline slicer produces the most consistent cuts. If slicing by hand, let the pastrami rest for five minutes after steaming so the surface firms slightly and holds its shape under the knife.

Bottom line

Smoking pastrami at home takes time — the 5-to-7-day brine is non-negotiable — but the active work is minimal and the result is substantially better than store-bought. Brine a brisket flat with Prague Powder No. 1, coat with a coarsely cracked 2:1 coriander-pepper rub, smoke at 225°F to 155–160°F, wrap in foil, pull at 165°F, steam to 200°F for 60 to 90 minutes, rest for 30 minutes, and slice thin against the grain. That is the complete process, and it produces pastrami worth the wait.

For related reading: how to smoke a brisket flat, smoked brisket rub recipe, best offset smokers, best instant-read thermometers.