guides
How to Season a Blackstone Griddle: First-Time and Re-Season Guide
Learn how to season a Blackstone griddle: first seasoning, day-to-day maintenance, and full re-season for a perfectly non-stick flat top.
Season a new Blackstone griddle by lighting all burners on high for 10–15 minutes until the steel turns dark, then applying four to five very thin layers of oil — wiping each coat almost completely off before heating the next one through. The entire session takes about 45 minutes and transforms bare rolled steel into a naturally non-stick cooking surface. Re-seasoning a neglected or rusty griddle follows the same process after stripping with a scraper and steel wool.
What you need before seasoning
The only required supplies are a high-smoke-point cooking oil and paper towels. Everything else is optional but makes the job cleaner and easier.
Required:
- High-smoke-point cooking oil (canola, vegetable shortening, flaxseed oil, or Blackstone Griddle Conditioner)
- Paper towels or a lint-free cloth
- Tongs or heat-resistant gloves to safely handle paper towels on a hot surface
Helpful but optional:
- A griddle scraper for cleaning between coats and post-cook maintenance
- A squeeze bottle for controlled, even oil distribution
- A dedicated spatula set sized for flat top griddles
The Blackstone griddle ships from the factory with a protective food-grade oil coating that prevents rust during transit. This is not seasoning — it burns off cleanly during the first heat-up, which is why the griddle discolors and smokes heavily the first time you run the burners. That smoke is expected and burns off within 15 minutes.
How to season a Blackstone griddle for the first time
Step 1: Do the initial burn-off
Before adding any oil, light all burners on high and let the griddle run for 10–15 minutes. Watch the steel surface change color from silver-grey to yellow, brown, and eventually a mottled blue-black. This color change is the factory protective coating burning off and the steel beginning to oxidize — it is the correct first step, not a sign something is wrong.
Turn all burners off and let the surface cool for 4–5 minutes. The griddle should still be very hot — work with tongs or gloves for everything that touches the cooking surface.
Step 2: Apply the first oil coat — extremely thin
Squeeze or drizzle a small amount of oil across the griddle surface — roughly 1 to 2 tablespoons for a 36-inch model. Using a folded paper towel held with tongs, spread the oil across the entire cooking surface including the side walls and outer edges. Then wipe most of it back off. The surface should look like it barely has any oil on it — a faint sheen at most, not a visible wet coat.
This is the step where most beginners go wrong. Applying too much oil is the single most common cause of sticky, patchy, or flaking seasoning. The layer should be so thin you question whether you applied anything at all.
Step 3: Turn burners to medium-high and burn the coat in
With the thin oil layer on the surface, turn all burners to medium-high. Watch the griddle — the oil will begin to smoke, then the smoke will slow and eventually stop. That process takes 8–10 minutes per coat and signals the oil has polymerized and bonded to the steel. The surface will visibly darken with each cycle.
When the smoke stops or nearly stops, turn burners to low for 1–2 minutes before the next coat.
Step 4: Repeat four to five times total
Repeat Steps 2 and 3 four to five times in the same session. Each layer adds depth to the seasoning, darkening the surface and building the polymer base that creates non-stick performance. After four to five coats the surface should be uniformly dark — somewhere between dark brown and black — with a smooth, even appearance.
A 36-inch four-burner Blackstone takes 45–60 minutes for a complete first seasoning session. The 17-inch and 22-inch tabletop models run closer to 30 minutes.
Step 5: Cool-down and storage
After the final coat, let the burners run on low for 5 more minutes, then turn everything off and allow the griddle to cool with the lid open to room temperature. Apply a very thin final oil wipe once the surface is cool to the touch. Put the cover on for storage.
The Blackstone 36-inch 4-burner flat top is the reference griddle for home outdoor cooking — large enough to cook a full family meal in a single pass:
Best for Home backyard flat top griddle cooking
Blackstone 36-Inch 4-Burner Flat Top Gas Grill Griddle
720 square inches of flat top surface across four independently controlled burners. The benchmark Blackstone for home use — durable build, enormous online cooking community, and widely available replacement parts and accessories.
★★★★★ 4.7 · 12,400 reviews
Check current price on Amazon→Which oil works best for Blackstone seasoning?
The short answer: any oil with a smoke point above 400°F works. The differences between popular choices are real but small. Use what you already have.
| Product | Best for | Rating | Notes | |
|---|---|---|---|---|
| Canola oil | Best all-purpose beginner choice | ★★★★★ | Smoke point around 400F. Inexpensive, neutral flavor, available everywhere. Polymerizes reliably with minimal residue. The default recommendation for most new griddle owners. | — |
| Blackstone Griddle Seasoning Conditioner | Best dedicated product | ★★★★★ | Formulated specifically for flat top griddles. Applies evenly from the canister and builds a consistent coat. Worth buying for the first seasoning if you want a purpose-built product. | — |
| Vegetable shortening (Crisco) | Best pantry fallback | ★★★★★ | Smoke point around 490F. Polymerizes well and is forgiving to apply. Lard performs identically. Good choice if you already have it on hand. | — |
| Avocado oil | Best premium option | ★★★★★ | Smoke point around 520F. Clean polymerization, neutral flavor. Slightly higher cost than canola but performs well at high heat and leaves minimal residue. | — |
| Flaxseed oil | Best polymerization chemistry (use thin) | ★★★★☆ | High polyunsaturated fat content polymerizes very hard. Prone to flaking if applied thick. Use extremely thin layers and expect more coats than with canola. | — |
| Olive oil or butter | Not recommended for seasoning | ★★☆☆☆ | Smoke point too low. Does not polymerize correctly and leaves a gummy or rancid residue. Fine for cooking on an already-seasoned griddle but do not use for initial seasoning coats. | — |
The Blackstone Griddle Seasoning Conditioner is the most convenient option if you want a product designed for the job: search on Amazon
Day-to-day maintenance: the 3-minute post-cook routine
Consistent post-cook maintenance prevents the need for full re-seasoning for years. The routine takes about 3 minutes while the griddle is still hot.
- Use a griddle scraper to push food debris and excess grease into the grease trap or off the edge of the surface.
- Pour a small amount of water onto the hot surface — it will steam vigorously and lift cooked-on residue. Scrape again while the steam is working.
- Wipe the surface dry with paper towels. Repeat the water step once more if residue remains.
- Apply a very thin coat of oil with a paper towel while the surface is still warm. The surface should look lightly oiled, not wet.
- Turn burners off. Let the griddle cool with the cover off until the surface drops below roughly 200°F, then put the cover on.
What to avoid:
- Never pour cold water on a griddle that is still extremely hot — the thermal shock can warp the steel plate.
- Never leave the surface wet overnight — surface rust forms within hours in humid conditions.
- Never use soap on the griddle cooking surface — it strips the polymerized seasoning. A scraper and water handle the vast majority of cleanup.
A quality bench scraper or dedicated griddle scraper makes the daily cleanup significantly faster: see options on Amazon
When and how to re-season a neglected Blackstone
Signs the griddle needs re-seasoning:
- Orange or reddish rust patches anywhere on the cooking surface
- Food sticking significantly more than it used to
- Patchy, uneven, or flaking surface coloring
- A griddle that sat unused outdoors without a cover through a wet season
Re-seasoning follows the same process as first seasoning with one additional step at the start: stripping the surface back to bare steel.
Stripping a rusty or neglected griddle
- Turn all burners on high for 10 minutes to loosen rust and softened debris.
- Turn off burners, then pour a small amount of water on the hot surface. Steam loosens rust and stuck residue.
- Scrape aggressively with the griddle scraper, working in straight lines across the entire surface. The goal is to remove all visible rust and loose or flaking seasoning.
- Use coarse steel wool or a grill brick on persistent rust spots. The surface will look rough and patchy after this step — that is exactly right.
- Wipe completely dry with paper towels. If rust spots remain, repeat the scrape and steel wool pass.
- Once the surface shows clean, uniformly dull steel with no visible orange rust, immediately begin the seasoning process from Step 1. Do not leave bare steel sitting — rolled steel develops surface rust within minutes in outdoor humidity.
A moderately neglected griddle (light surface rust, stored with a cover in a dry garage) restores in under 2 hours. A heavily neglected griddle left outside through a rainy season may need two complete seasoning sessions over two days to build back a quality surface.
Common seasoning mistakes
Applying oil too thick. This is the most frequent error. Thick oil does not polymerize evenly — it stays gummy, pools in low spots, and eventually flakes. If the surface looks wet or shiny after applying oil, wipe more off before heating the next coat.
Rushing the smoke-out process. Each coat needs to finish smoking before the next coat goes on. Adding oil before the previous layer has fully polymerized traps uncured oil underneath, creating soft spots in the seasoning.
Using low-smoke-point oil. Oils like olive oil or butter burn improperly at griddle temperatures and leave a rancid or bitter residue rather than a durable polymer film. Use oils with smoke points above 400°F.
Covering the griddle while still hot. Trapping heat under the cover creates condensation that promotes rust even on a well-seasoned surface. Always cool with the cover off until the surface temperature drops significantly.
Storing uncovered outdoors. A fitted Blackstone cover is not optional in wet climates. Even excellent seasoning will rust if exposed to rain and humidity over weeks or months.
FAQ
Frequently asked questions
How long does the first Blackstone seasoning take?
Can I use vegetable oil to season a Blackstone?
How do I know when the seasoning is done?
My Blackstone has rust. Is it ruined?
How often should I fully re-season my Blackstone?
Does the burner temperature matter when seasoning?
Bottom line
Seasoning a Blackstone griddle comes down to one core principle: extremely thin layers of oil burned into the steel at medium-high heat, repeated four to five times. The initial session takes under an hour and turns bare rolled steel into a flat top surface ready for smash burgers, breakfast hash, stir fry, and everything else the griddle does well. The ongoing maintenance — a 3-minute wipe-down and thin oil coat after every cook — keeps it performing for years. Rust and neglect are both recoverable. There is no Blackstone griddle that a scraper, steel wool, and a patient re-seasoning session cannot bring back.
For related reading: the best outdoor griddles for every budget and backyard, flat top griddle recipes to put that seasoned surface to work, gas grill and griddle combo options, or seasoning cast iron — the same principle applied to cookware.